DeepSea Power and Light

DeepSea Power and Light

BlueZone Group has supplied DeepSea Power & Light products to many projects in the Offshore Oil and Gas, Oceanographic and ROV markets. DeepSea Power & Light was founded in 1983 to provide high quality, innovative products to the oceanographic community. Initially manufacturing deep water power systems, the company’s expertise and product line has grown to include underwater video and lighting systems. All of DeepSea Power & Light’s standard products are rigorously designed to perform in the harsh marine environments, from wet/dry surface applications to full ocean depth deployments. DeepSea Power & Light’s experienced engineering staff also provides custom solutions to any underwater imaging problem or systems design.

Lux Lies!

Many people know that it is much easier and less expensive to measure the lux output of a light source instead of its lumen output, but lux lies where lumens doesn’t!

The measure of the quantity of light as seen by people is called lumens. If you have twice as many lumens, you have twice as much “light”. The lumens measurement, if done correctly, is independent of where in the beam or how far from the light fixture the measurement is made. The true, most honest metric of light output by an underwater light is the number of lumens exiting the fixture and traveling into the water.

Lumens in this sense are difficult to measure. Either the light output in all directions needs to be measured and added up, or a device called an integrating sphere needs to be used effectively adds all of the light in real time. Since this integrating sphere is quite expensive, not many light companies invest in one and therefore measure the light output of their lights with a simple and inexpensive lux-meter instead (that’s why you see lux measurement on spec sheets way more than you see a Lumen measurement).

Lux is just lumens per square meter. If you have a bright, narrow, highly focused spot light, you will get a very high lux values, but this really does not tell you much about how much total light the fixture is putting into the water. Let’s give you an example, if you need to change your tyre at night at side of a dark road, would you use a flash light with flood reflector or a laser?  Of course a flood light. However if you put a lux-meter by these two and measure them up, the laser will blow away the flood light as far as light output goes. That’s what I meant by saying “lux lies”!

DeepSea Power & Light specify all of their lighting products by lumen output. You can depend upon DeepSea Power & Light products to be accurately specified, performing to specification and suitable for your intended application. Contact BlueZone to let us assist you with a selection of DeepSea Power & Light products.

 

   
   
   
   

 

Key Features

Up to 25-hour mission duration

Speeds up to 4.2 knots

Increased module payload capacity

Search and recovery

Hydrography

Deep sea mineral exploration

Marine & Fisheries research

Product Enquiry

    Product EnquiryRental Enquiry

    Related Articles

    HII Mission Technologies Newest Addition: The REMUS 130 UUV

    Open Architecture and Modularity Minimize Cost and Risk HII announced the newest third generation REMUS 130 unmanned underwater vehicle (UUV), which is based on the highly successful REMUS UUV series....

    Read More

    SEABER YUCO-SCAN micro-AUV Demonstration

    Exploring the Future of Underwater Surveys. On the 5th of February 2024, BlueZone Group successfully completed the first demonstration with the SEABER YUCO-SCAN micro-AUV at Lake Macquarie, NSW. This demonstration...

    Read More

    BlueZone Group and Klein Marine Systems: Pioneering Hydrographic Advancements in Australia

    BlueZone and Klein Marine Systems Illuminate Hydrographic Excellence during Dr. Peter Ramsay’s latest visit. Recently, Dr. Peter Ramsay, Director of Strategic Hydrographic Programs at Klein Marine System travelled to Perth,...

    Read More